Average Reviews:
(More customer reviews)Since it's arrival, I'e used the sysems on two occasions. The first was an in-door party for about 120 folks. I ran four speakers (two 400 watt and two 600 watt) and a 600 watt subwoofer for 6 hours, pretty well maxed out. Worked flawlessly.
Second was an outside gig for 5 hours, pushing the same configuration. Worked flawlessly.
On both occasions I was complimented on the robustness and clarity of the music.
If Berhinger would just work on their owner's manual a little more. It's basically useless.
Click Here to see more reviews about: Behringer PMP2000 800-Watt 10-Channel Powered
If you need superior stereo sound for small club gigs, churches or speeches, but have to keep the outboard gear to a minimum, the 10-channel PMP2000 can really deliver. This 800-Watt mixer has built-in mic preamps and an FX processor, as well as enough power to drive both mains and monitors, thanks to dual 350-Watt onboard power amps.
Massive Mono or Stunning Stereo The PMP2000 gives you the choice of 2 x 350-Watt stereo, 2 x 350-Watt dual mono or 800-Watt bridged mono output. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP2000 can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.
Classic Control, State-of-the-Art Sound Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Nine built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the PMP2000.
Built-in Digital Effects Processor It's also equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor has a footswitch jack for remote on/off.
Changing the Channels The PMP2000 gives you loads of flexibility in accommodating whatever the center of attention happens to be. Channels 1-6 are for mics, bass guitars or other mono instruments. Stereo channels 7-12 are ideal for keyboards. Use the 2TR IN RCA inputs to feed in external stereo signals from CD players or tape decks.
The Ins and Outs REC OUT RCA outputs send line-level signals from the mixer to a recording device, so you can finally get to work on that triple-live album you've always dreamed of. The left and right Output 1/4-inch connectors are there just in case you need to connect more amps. Connect your monitor power amps or active monitor speakers to the MONITOR output.
What's in the Box Behringer PMP2000, Power Cable, User's Manual
Click here for more information about Behringer PMP2000 800-Watt 10-Channel Powered
0 comments:
Post a Comment