Showing posts with label recording. Show all posts
Showing posts with label recording. Show all posts

Fostex MR-8mkII 8-Track Digital Recorder Silver Review

Fostex MR-8mkII 8-Track Digital Recorder Silver
Average Reviews:

(More customer reviews)
I still have the 1st gen MR-8 (the red one) and when I got the silver Mk-II for Christmas, I wasn't sure I really needed it, as I thought it was no better than my red one but for throwing on a few more bells & whistles. Firing it up and laying down a few basic tracks and playing them back demonstrated that not only are there a couple more features but the sound quality is much improved over the original. I played it back through my stereo with my wife in another room across the hall and she thought I was playing the guitar and singing live. So, I'm looking forward to doing a lot of recording with this unit with more professional sound quality (I believe it is equivalent to PC sound quality, plus I like the silver finish much better than the old red model!) This is a very nice personal recorder for not a lot of money.

Click Here to see more reviews about: Fostex MR-8mkII 8-Track Digital Recorder Silver



Buy Now

Click here for more information about Fostex MR-8mkII 8-Track Digital Recorder Silver

Read More...

Audio-Technica AT4021 Cardioid Condenser Microphone Review

Audio-Technica AT4021 Cardioid Condenser Microphone
Average Reviews:

(More customer reviews)
This is a sweet little small-diaphragm condenser. It is near-ruler-flat from 20-20KHz. Getting those extremes -- 15K-20Hz and especially 20-50Hz -- is unusual in an affordable cardioid SDC.
I like this mic for general acoustic ensemble or instrument recording because of the extended low and high-end (really sweet lows). It is very popular on acoustic guitars, and wherever you want to capture the shimmer up top (choirs, drum overheads). I've gotten agreeable full-range jazz drum kit tracks by setting one up level with the top of the kick, a foot out in front of the kit.
Another mic to consider at this price/performance point is the Shure SM81 Instrument Microphone (it has just the slightest bit of color compared to the 4021, and a narrower frequency range, but it is a classic clean bright sound for this kind of thing). You can find sound samples of this and other comparable mics by searching for SDC microphone shootout on the web.
You may also be weighing this against Rode NT5 Matched Pair Recording Condenser Package (or you were back when this was $250). I think the 4021 sounds a tad better than the NT5 as a single mic, a little less hyped upper mid. But if you are planning on using two as a stereo pair, you might prefer the NT5 matched pair, because its off-axis response is more suitable for stereo recording. The off-axis response of the 4021 is pretty interesting -- it stays flatter for the mid- and higher-frequencies, and drops off for the lows. That's backwards from many mics. It means it's more forgiving about placement for something like an acoustic guitar or cymbal. But it also means your stereo image will smear towards the center with coincident stereo miking techniques, except for the low frequencies (exactly where coincident imaging is less effective anyway).
So if you use a pair of these for stereo, set up non-coincident, ORTF or even as you might place omnis. I get really pleasing results with a 4021 pair inside a grand piano, in an ORTF configuration nearly centered inside with one pointing to the high hammers and one pointing to the low strings at the back of the piano.

Click Here to see more reviews about: Audio-Technica AT4021 Cardioid Condenser Microphone



Buy NowGet 30% OFF

Click here for more information about Audio-Technica AT4021 Cardioid Condenser Microphone

Read More...

Rode NTK Tube Condenser Microphone Review

Rode NTK Tube Condenser Microphone
Average Reviews:

(More customer reviews)
Great mic - excellent sound. I have been a pro voiceover artist for over 30 years and have dealt with a variety of studio mics. In building my own studio I really wanted a front end that had a clear and smooth full-range sound. The R0de NTK was recommended to me by another "big voice" artist, and completely lives up to the recommendation. Everyone I have talked to says it's about the best value out there. If you have cash to blow, you can get a "noyyyyyymannnnn" (raise eyebrows here), or you can enjoy the sound of this mic and take the extra $3200 and spend it on more gear. The hard plastic padded case for the mic and power supply are a nice touch. Don't forget to buy a shock mount for it!
Enjoy -

Click Here to see more reviews about: Rode NTK Tube Condenser Microphone



Buy NowGet 47% OFF

Click here for more information about Rode NTK Tube Condenser Microphone

Read More...

Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface Review

Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface
Average Reviews:

(More customer reviews)
This thing is awesome.
But let's start with the bad, before we get to the good. The Bad:
- The preamp quality is not that great. I want to be careful not to over-state this too much: they are certainly not BAD preamps, and they are certainly competitive with other preamps that can be bought eight at a whack for $300, but they are not fast-response, high-headroom, ultra-clean studio preamps. They are more like the preamps on a decent portastudio (duh). They have a bit of a tendency to flab out on DI bass tracks, and can turn a bit crunchy/hashy at the top with difficult program material such as cymbals or detailed condensers. Backing off the input gain and recording at lower levels helps but does not completely solve these issues. And ribbon mics are pretty much right out: there's just not enough clean gain to drive low-output mics while preserving sound quality. But they are perfectly adequate for midrangey, high-output dynamic live mics, such as Shure SM57s and 58s, and considering the price point and what you're buying, they are actually quite capable: VASTLY better than the 1/8" mic/line input on a typical consumer soundcard, and comparable with a typical budget/prosumer mixer or live console.
- Phantom power on only two channels. I imagine this is a limitation of using USB/battery power, and it's frankly kind of amazing that they can deliver 48V at all. But it is still a limitation. If you want to use this box for full-blown studio recording, for this reason and the above, you'll probably want to have some outboard preamps or a mixing console or some such (soundcraft makes some inexpensive mixers with pretty good preamps).
- Zero midi anything. I'm not sure if this is a "bad", so much as just something to be aware of. Inclusion of a simple GM synth or drum machine, or even the ability to record MIDI would have expanded the usefulness of this box, but also would have added a lot of complexity to the little menu-based LCD interface. Overall I think it was a better decision to leave it out, and keep the device easier to use, but it's worth being aware of: if you want to record midi instruments with this box, you will be recording the output as audio.
- Usability/latency problems as a computer audio interface. I found this box to be unsatisfying as a laptop audio interface using early 2010 drivers. USB audio interfaces can be iffy compared with firewire or PCI, and this was no exception. I experienced intermittent problems with crackly audio, dropouts and skips, and had to frequently adjust latency settings and/or restart the hardware. Such problems were intermittent, but even occasional meltdowns can make such a device almost unusable. It's easier to simply record standalone to the Zoom R16 and then dump the files into computer via USB for editing and mixing in your favorite DAW software. Bear in mind that every computer is a bit different, so YMMV, and future firmware or driver updates may help the situation. But for now I cannot recommend it as a primary multitrack audio interface for computer-based recording (although I certainly recommend it as a portable multitrack recorder that can integrate with a computer setup).
So much for the bad. The good:
- IT RUNS ON FRIGGEN BATTERIES. If you are new to recoding, it may not be clear what a revolutionary thing this is, to have a complete recording that you can leave on the coffee table or stick in a backpack and take a full project from recording, through mixing, with effects, and run the whole thing on six AA batteries. Battery-powered recorders are obviously not new, but this box is genuinely a full-capable recording studio that achieve the magic 8 simultaneous inputs, with effects and mixing. And battery life is actually quite good. The more tracks and more processing and effects you're using, the faster they deplete, but even at full load you're changing batteries maybe every two hours, more than enough time to re-charge a spare set of rechargeables.
- SD storage. Using SD cards as the storage medium means cheap and easy storage, but even better, no fans, no motors, no whirring/clicking hard disk... this box is *silent*. It also means that it records like tape: there is no saving, no file-management... just hit record or play, turn power on and off whenever you want-- no worries, and no inspiration-killing hassle.
- Ease of use is really good. Text- and menu-based LCD windows can be a nightmare to deal with, as anyone who was recording in the early days of digital knows. But if you're familiar with multi-track recording generally, this device is easy to use right out of the box. Reading the (pretty good) manual is not required to start recording and mixing, but it does reveal a LOT of deep functionality. If you are new to recording, this is a pretty easy way to get started: it doesn't have the graphical point-and-click simplicity of a computer-based interface, but it also skips over all the issues of latencies, drivers, file-management, and various computer-related headaches. The R16's true 8-input recording and 16-track playback allow it to skip/simplify internal routing, bussing, etc, making it very straightforward to use: every physical channel is a track, and there is a bank up/down key to determine whether you're working with tracks 1-8, or 9-16. Couldn't be simpler. Each channel has a play/mute/record toggle button with a color-changing LED to tell you what state it's in, and the transport controls work just like a tape machine. The menus for effects, project selection, track swapping, etc are all straightforward and well-thought-out, with clearly-labelled buttons for each menu. Connections are extremely simple and obvious. Each channel has a gain/trim control and a mix fader with a 4-LED meter that automatically switches from record level to playback level depending on the track status, and channels with switchable input status use separate physical switches to flip between phantom power on/off, built-in vs external mics, or instrument/mic inputs. Easy peasy, with no obscure or hidden settings or parameters to drive you nuts.
- The built-in mics are an outstanding feature. They are your basic electret omni mics, which means they are quiet, accurate, and have good dynamic response with both low- and high-volume material. Just flip the switch and set them to record and you can track all your rehearsals, live shows, living-room practice, whatever. You can make full multitrack demos using just this box and a pair of headphones.
- Built-in effects are comprehensive, quite good, and very well-thought out. The presets are very usefully-constructed for a box of this type, designed to minimize menu-based tweaking. The main "default" effects configuration is set up for semi-automatic per-channel eq/compression, a master reverb/delay with per-track send, and a full suite of guitar and bass effects on the hi-Z "guitar channel". Digging into the menus further allows you to assign any effect to any track, to change whether insert effects are "hard-coded" onto the incoming audio, or just applied as a bus effect (for example, if you wanted to hear the effect during tracking and playback, but keep the underlying audio "clean" for later processing in a computer DAW or whatever). There are also a host of nifty extras including preamp modellers, guitar and bass amp emulators, wah/modulation/etc "special effects", acoustic guitar and bass simulators, and so on. Not 10 years ago, this box would have been worth the price as a single-channel multi-effects processor alone. Some of the settings are a little weird, and I'd much rather do a full mixdown using hardware processors or computer plugins than using menu-based text inputs, but the effects are all real-time, and you can hear your changes as you make them, so it's certainly possible to do a full record with this box alone, and effects quality is comparable to other digital hardware processors.
- Overall sound quality is quite good. Even factoring in the preamp reservations above, 15 years ago you could have spent 10 or 15 thousand dollars EASILY and still not had the sound quality and capability of this little box (plus you would have needed 20 electrical outlets and a room to store it all in, not to mention hundreds or thousands of dollars worth of racks and cables). It probably won't replace your RME interface or Apogee converters, and it certainly won't replace a collection of API and Telefunken mic preamps, and you'll probably want to hang onto to your UAD card if you have one, but good luck sticking all that in a laptop bag and taking it to the beach.
This plus something like a Tivoli Audio iSongBook (or even a pair of headphones) makes a complete, battery-powered multitrack studio that fits in a backpack or laptop bag, with room left over to hold spare batteries plus a couple of mic cables and SM57s, if you want them. Laptop-based mobile DAWs have always seemed like an awesome idea, but in practice things like boot times, dongles, limited mobile interface options, mixing and control via mousepad, short battery life, self-noise, computer-related reliability and stability issues, etc have always tended to keep it a good "idea" as opposed to a truly mobile "on your lap" studio. This is perfect and easy to take on the road, record in the tour bus, in the rehearsal space, in the hotel room, at a picnic table, a house party, wherever.

Click Here to see more reviews about: Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface



Buy NowGet 43% OFF

Click here for more information about Zoom R16 Multitrack Recorder Controller and Audio Interface Multitrack SD Recorder Controller and Interface

Read More...

Boss BR-800 Digital Recorder Review

Boss BR-800 Digital Recorder
Average Reviews:

(More customer reviews)
Basically what it looks and feels like. Bought this unit thinking i can use it in my studio instead of
much older, more expensive and bigger BR-1200CD or BR-1600CD but I was disappointed with build
quality and changes to the control design. E.g. flat touch-buttons which are actually very unreliable.
You never know if you pressed then or not. The whole unit feels very light and "plasticky", the faders
are wobbling etc. BR-800 has some nice sound effects good mostly for guitarists or vocals, ability
to record 4 channels at a time is good too but overall build quality, the 6 faders instead of 8,
limited editing options make this recorder basically a recording toy.


Click Here to see more reviews about: Boss BR-800 Digital Recorder



Buy NowGet 25% OFF

Click here for more information about Boss BR-800 Digital Recorder

Read More...

Korg X50 61-Key Synthesizer Review

Korg X50 61-Key Synthesizer
Average Reviews:

(More customer reviews)
I've owned the x50 for a couple of years now and use it in my home studio. First of all is sound quality. The top of the line Korg series is the Triton keyboards, which cost thousands of dollars (depending on the model). This keyboard uses the same engine, so the sounds are quite similar to the top of the line model. In other words, incredible sounds.
So why is it less than a thousand bucks? First of all, it's not as customizable. Make no mistake, you can still tweak every sound, but it's not as easy or as in depth as the Triton series.
Second are the physical stats: 61 VELOCITY SENSITIVE, but NOT weighted keys. This means that you can still play with dynamic control, but there isn't the feedback one might be used to from a piano. The keyboard itself is very well constructed but mainly plastic. It will surprise you in it's lack of heft, but don't confuse that with cheapness. It's solid.
So why use this? The voices are amazing. I use it in my home studio to backup my guitar. For one song I wrote in a flute solo and then brought in a flautist to learn the song so she could play with me live. She commented on how good the flautist was who recorded for me. She didn't even know it was a keyboard.
The strings, piano and organ sections are particularly strong.
It's great for my studio since I'm not a pianist. It's exceedingly portable so it would be great for gigs too. It's really a great deal since you get thousands of dollars worth of voices for less than a thousand.

Click Here to see more reviews about: Korg X50 61-Key Synthesizer



Buy Now

Click here for more information about Korg X50 61-Key Synthesizer

Read More...

Neumann TLM-103 Microphone Review

Neumann TLM-103 Microphone
Average Reviews:

(More customer reviews)
This microphone picks up the nuances of vocal takes in all possible "colors" if that makes any sense as opposed to most other mics that only capture most prominent sounds possible for a microphone in this price range.
Having said that, you must realize that high end microphones means that their audio sensitivities are way up there in that they pick up sounds you never thought existed in your surroundings like the small freezer fan in the fridge downstairs behind multiple closed doors.
NOTE: If your acoustic environment "issues" are not resolved ( or untested) this microphone will open up multiple problems such as humming noises from various sources that you previously did not realize existed.
This is a very sensitive and probably one of the most acoustically sensitive microphones on the prosumer market.
I use it mostly for voice overs and it is the best mic in my studio since it really captures all the inflections that are otherwise lost (uncaptured) from other microphones within its price range. I live in a relatively quiet environment out and away from outside noises and I still struggle with acoustics so heads up to those of you who live in or nearby urban areas.
If your "voice print" is within a higher pitch range (than normal for most people) and are accustomed to a lower tone in order to inflect common narrative scales, it will get a bit of practice to get used to because with this mic EVERYTHING will be accentuated (slash) enhanced, maximized and recorded.
Some voices (particularly female)are overly accentuated due to compensation habits from using lower quality microphones.
This takes practice to adjust to but once achieved,(on the part of the vocalist) this mic is the best gadget ear you can find for the price.
I own a Rode Broadcaster and a Sennheiser 416 that I frequently use for voice overs but for a full tonal range (such as audio-book long-form narrations) this is my "GO TO" microphone.
I highly recommend that potential buyers test this microphone under various applications (whether singing or voice over narrations or what have you--extensively BEFORE buying because it has been my experience that some people simply CANNOT adjust their vocalizations to this microphone.
In other words, kick all the tires on this piece of audio gear and vocally "test drive extensively" before deciding on purchasing lest you end up disappointed for reasons unrelated to the gear itself.
I for one am supremely pleased and consider myself a very PROUD owner of this incredibly versatile microphone for any and all applications so long as all other elements of a recording atmosphere are commensurate (i.e. equal to) its capacities.
If you have an acoustically sound environment suitable for your recording needs then this is a MUST piece of gear and DO NOT be fooled by lower priced alternatives from people who have not experienced "true" quality in said category.
This is not a Volkswagon but rather a Mercedes in a whole different class.

Click Here to see more reviews about: Neumann TLM-103 Microphone

Ideal for all professional and semi-professional applications requiring high sound quality on a limited budget. The TLM-103 uses the transformerless circuitry found in numerous Neumann mics and a capsule derived from that used in the U87. Cardioid pattern, acoustically well-balanced, and provides extraordinary attenuation of signals from the rear. Frequency range: 20Hz-20kHz. Impedance: 50 ohms.ApplicationsDue to the universal cardioid pattern, straightforward handling, extremely low self-noise level, and finally, the price, the TLM 103 is predestined for all demanding applications from home recording to professional broadcasting and commercial recording studios.Acoustic featuresThe TLM 103 is addressed from the front, marked with the red Neumann logo on the microphone body. The K 103 large diaphragm capsule is based on the K 87, well known from the U 67/U 87 microphones. The capsule has a flat frequency response up to about 5 kHz, and above that, a wide flat 4 dB presence boost. The large wire mesh headgrille protects the capsule from explosive sounds and effectively prevents pop noises. These characteristics are achieved without resorting to corrective resonance effects. Therefore, the microphone maintains an excellent impulse response and reproduces the finest details of music and speech without coloration.Electrical featuresWith just 7 dB-A / 17.5 dB CCIR the self-noise level of the TLM 103 is so reduced that even the smallest signals are reproduced basically noise-free. As it is capable of handling sound pressure levels up to 138 dB without distortion, the TLM 103 provides a dynamic range of 131 dB, according to DIN/IEC 651. The letters TLM stand for "transformerless microphone." With TLM technology the usual output transformer is replaced by an electronic circuit. As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.Operational safetyThe entire internal construction i

Buy NowGet 19% OFF

Click here for more information about Neumann TLM-103 Microphone

Read More...

Yamaha QY100 Music Sequencer Review

Yamaha QY100 Music Sequencer
Average Reviews:

(More customer reviews)
This is the best drum machine out there, because it's the only one I could find that allows you to substitute any yamaha keyboard sound for a drum. In other words, instead of the limit sounds you get from other drum machines (snares, kicks, symbols, and maybe bass), you get EVERY sound with this thing. So what you can do with this thing is take, for example, the kick on any preset drum loop this thing has, and replace that kick with a trumpet or guitar or strings. And obviously with such an awesome feature like that, it would be important to be able to set the "key" for those other instruments, which this thing does better than any other with its built-in miniature keyboard (look at the photos to see, it has a two octave keyboard of white and block keys) which you can use to "record" the key changes of your sequence. So you take, for example, a preset sequence/loop and you hit "record" and you begin to play along with the keys, and it records that as a song. You can then play back that song in any tempo, and it's like you got a whole band accompanying you. And more than this, this thing has a full-feature synth so you can edit every sound, make it dull, make it echo, add any effect, adjust the equalization of any sound, resonance, cut-off certain frequencies, etc. The only thing I wish this thing would do is light-up better in the dark. It can be hard to see in the dark. I had to use a book-reading light to see it in some live settings.

Click Here to see more reviews about: Yamaha QY100 Music Sequencer



Buy NowGet 13% OFF

Click here for more information about Yamaha QY100 Music Sequencer

Read More...

Avalon VT737SP Class A Tube Channel Strip Review

Avalon VT737SP Class A Tube Channel Strip
Average Reviews:

(More customer reviews)
I use this channel strip during nearly every recording session I run. The sound is amazing for vocals (in combination with a good mic), producing a warm and yet extremely clean sound.
I have used the unit on acoustic guitar, kick drum, electric guitar and even bass. I was able to get stunning sound from all sources, with a little tweaking of the settings and mic placement.
This unit is capable of immaculate results. Well worth the money.

Click Here to see more reviews about: Avalon VT737SP Class A Tube Channel Strip



Buy NowGet 10% OFF

Click here for more information about Avalon VT737SP Class A Tube Channel Strip

Read More...

RODE NT1000 Vocal Condenser Microphone Review

RODE NT1000 Vocal Condenser Microphone
Average Reviews:

(More customer reviews)
I went shopping for a Rode NT1. Rode mics use superb capsules mounted in machined housings you could drive a truck over, and the NT1 is a great mic for male vocals. The guy at the store suggested the NT1000. I recorded myself on both, and there wasn't much difference, but the 1000 just sounded a little smoother. But, the NT1 had a painted finish (may have changed since), made out of aluminum. When you screw the mount on it feels rough, like screwing in a light bulb with an aluminum base. The NT1000, though, feels rich and expensive, a nickel-steel finish (I guess) more like the expensive Neumanns. And when you screw the parts together they feel precise and elegant. It was a hundred bucks more than the NT1, but with the slightly nicer sound, and the much nicer look and handling feel, it seemed worth it.
The only problem I've had with it is weight. It's fairly heavy, and can't be extended very far on my boom stand without falling over.
Great dynamic range, low noise, very detailed.

Click Here to see more reviews about: RODE NT1000 Vocal Condenser Microphone



Buy NowGet 45% OFF

Click here for more information about RODE NT1000 Vocal Condenser Microphone

Read More...

THD Electronics HP8 Hot Plate Power Attenuator, 2 Ohm Review

THD Electronics HP8 Hot Plate Power Attenuator, 2 Ohm
Average Reviews:

(More customer reviews)
This product does wonders for a tube guitar amplifier. It permits great amp sound at reduced sound amplitude.

Click Here to see more reviews about: THD Electronics HP8 Hot Plate Power Attenuator, 2 Ohm



Buy NowGet 21% OFF

Click here for more information about THD Electronics HP8 Hot Plate Power Attenuator, 2 Ohm

Read More...

Behringer 1622FX 16-Input 2/2 Bus Mixer with Effects and USB Review

Behringer 1622FX 16-Input 2/2 Bus Mixer with Effects and USB
Average Reviews:

(More customer reviews)
I have been looking for a mixer for my home studio. I use it to produce audio programming for a radio station.
I checked several others along with this. I heard good reviews on Mackie products. I have seen them in action and I believe they are quite good. However, after a comparison, the Behringer is of equal quality with more features for a lower price. I would highly recommend this to anyone needing to mix several aux sources along with microphones.

Click Here to see more reviews about: Behringer 1622FX 16-Input 2/2 Bus Mixer with Effects and USB

The X1622USB features four XENYX-fueled mic inputs with channel Inserts, "one knob" compressors and 3-band British-style EQs with a sweepable, semi-parametric mid frequency band. The four stereo line-level channels offer enhanced fine-tuning via 4-band EQ, which is extremely handy for adjusting critical keyboard midrange frequencies. Aux 1 Sends are switchable (pre- or post-fader) and individual channels can be assigned to two subgroups for mixing flexibility.

XENYX USB Series Mixers XENYX USB Series mixers are designed to handle your live gigs, and they provide the state-of-the-art tools you need to make stunning, professional-quality recordings. Along with their built-in USB/audio interfaces, XENYX USB mixers come with all the recording and editing software you'll need to turn your computer system into a complete, high-performance home recording studio.
Sonically Superior Mic Preamps All XENYX mixers have one thing in common--great-sounding, high headroom XENYX mic preamps. These state-of-the-art mic pres represent a major step in the evolution of audio technology--and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, XENYX mixers provide such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren't looking.
Sublimely Musical British EQ The British consoles of the 1960s and '70s changed the sound of rock and roll--without them the British Invasion might not have happened. Those legendary mixing desks soon became the envy of engineers and producers all over the world. The channel EQ on our XENYX mixers is based on that very same circuitry, allowing you to imbue signals with incredible warmth and detailed musical character. Even when applied generously, these equalizers exhibit sweet forgiveness and superb audio quality.
One-Knob Compression Ask professional sound engineers what their favorite piece of external processing gear is and the majority response will be virtually unanimous--dynamic compression. What is compression? We're glad you asked. Compression essentially limits the dynamic range of a signal, lowering the level of loud sounds and turning up softer sounds, to achieve sonic balance. But applying compression is a delicate art that many novice, and even intermediate, sound techs have great difficulty mastering. Our "one-knob" compression is available on all mono channels and is easy to operate, even for entry-level users. With this one knob, you can easily dial in the perfect amount of compression for instruments and vocals, creating powerful mixes with punch and clarity. This is indeed a rare feature for products in this class--but standard on all XENYX USB mixers.
Effective FX All XENYX USB Series mixers (except the 1204USB) feature our new 24-bit dual engine FX processor, with 16 editable, studio-grade presets including reverb, chorus, flanger, delay, pitch shifter and multi-effects. Complete with a highly accurate input meter, these effects can be altered to your personal taste via the Parameter control. Time-based functions can be entered manually by pressing the Tap button in tempo with the music.
Recording Bliss There was a time when the recording process called for lots and lots of expensive gear, which meant the average musician had to buy time at a recording studio--and that time was pricey indeed. But modern technology has put personal recording well within the reach of virtually anyone with access to a computer. How do you get all that music flying around your brain into your computer? That's where XENYX USB mixers come in. Thanks to the built-in, bi-directional stereo USB audio interface, you can connect any of these mixers directly to your PC or Mac computer via a single USB cable. Now any signal source you connect to the mixer can be recorded directly to your hard drive.
Software Included Because you'll want to take full advantage of the XENYX USB Series mixers' recording and podcasting potential, Behringer has thrown in a massive software package that includes Audacity (the most popular open source audio editor), Podifier, Juice, Podnova and Golden Ear (a great selection of podcasting software). You're ready to go live on your PC or Mac computer right out of the box! You also get more than 100 virtual instruments and 50 FX plug-ins, turning your computer into a complete home-based or mobile recording studio from input to output.
energyXT2.5 Compact BEHRINGER Edition Included When you're ready to take your recording projects to the next level, XT Software's energyXT is just the trick. This amazing DAW (digital audio workstation) makes it easy to manipulate your audio and MIDI files, turning song ideas into stunning CD or Web-ready recordings. energyXT includes its own multi-FX processor, plus a built-in synthesizer/sampler and a drum machine, both of which can be accessed directly via an external controller (such as our UMA25S) or programmed in step-write mode.
What's in the Box Behringer 1622FX Mixer, Power Cable, User's Manual, Software CDs, Rack Mount Brackets

Buy NowGet 31% OFF

Click here for more information about Behringer 1622FX 16-Input 2/2 Bus Mixer with Effects and USB

Read More...

Behringer PMP3000 1,200-Watt 16-Channel Powered Mixer Review

Behringer PMP3000 1,200-Watt 16-Channel Powered Mixer
Average Reviews:

(More customer reviews)
We bought this powered mixer to replace a defective one at our church. Our sanctuary can seat 900 people and so it is a fairly large auditorium. The mixer has more power than the previous powered mixer and many more features. I especially like the individual channel mute buttons so we can kill a mic without having to move the gain adjustments. The only thing I did not like about this mixer is there was no block working diagram available. So we had to construct one for ourselves. To a trained eye, by using a block schematic diagram, it is easier to know how to set up the mixer for different applications and to troubleshoot a problem.
The actual steady state power output is more like 200 watts (each of the two stereo outputs)for our 8 ohm speaker system but still is greater that the old powered mixer. That is a total of 400 watts as compared to the (at first glance) advertised 1200 watts. We do not have to use the maximum gain on any channel so the output is fine for our use. There is also a headset output that follows the actual powered signal which can give you a better idea of mixed signal that is sent to the speakers and to our DVD and CD recorders.
The people at Behringer were able to answer all my questions without any problems so tech support was great. We did have a little difficulty in figuring out how to use the FX special effects (reverb, etc) generator but once we did figure it out, using it was just as advertised. You can probably guess that the instruction manual is not extensively done. But with a limited budget for an emergency purchase of a powered mixer, we are thoroughly satisfied with the quality and price.
The price is exceptional and caused a few doubting comments about how could we get what we needed for such a small price. We have been using the unit for two months now with absolutely no problems.
My suggestion is that before you purchase this unit, download the instruction manual from the Behringer site. You will see the output connection is not a 1/4 jack. If that is what you have, you will have to buy an adapter or convert the present cable connection to the new type. The adapters or connectors are not very expensive (Neutrik NA4LJX Speakon To 1/4" Mono Jack Adapter)and cost under $11 including shipping. You can optionally by the Speakon connectors and convert the speaker cable to the new connector type.

Click Here to see more reviews about: Behringer PMP3000 1,200-Watt 16-Channel Powered Mixer

If you need superior stereo sound for small club gigs, churches or speeches, but have to keep the outboard gear to a minimum, the 16-channel PMP3000 can deliver. This 1,200- Watt mixer has built-in mic preamps and an FX processor, as well as enough power to drive mains and monitors, thanks to dual onboard 600-Watt power amps.

Massive Mono or Stunning Stereo The PMP3000 gives you the choice of 2 x 600-Watt stereo, 2 x 600-Watt dual mono or 1,200-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, the PMP3000 can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.
Classic Control, State-of-the-Art Sound Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Eight built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the PMP3000.
Built-in Digital Effects Processor The PMP3000 is also equipped with a 24-bit FX processor, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you're pulling double duty as sound engineer and performer, the FX processor features a footswitch jack for remote on/off.
Changing the Channels The PMP3000 gives you excellent flexibility to accommodate whatever a performance requires. Channels 1-8 are for mics, guitars and other mono instruments. Stereo channels 9-16 are ideal for keyboards. All mono channels have 3-band EQ, switchable Low Cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.
The Ins and Outs Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch eliminates the vocals from pre-recorded music for karaoke applications.
CD/TAPE RCA outputs send line-level signals from the mixer to a recording device. Left and right output 1/4" connectors are there in case you need to connect more power amps. Connect your monitor power amps or active monitor speakers to the MON SEND output.
A STANDBY switch mutes all mic channels during breaks, preventing the microphones from picking up noise or interference. You can leave all faders untouched while you play a CD via the CD/TAPE inputs.
The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint which frequencies to adjust for optimized sound, without the feedback.
Speaking of Optimized Output The PMP3000's POWER AMP switch toggles between three operating modes: MAIN, MON/MONO and BRIDGE (the power outputs of A and B on the back panel are added and provided at OUTPUT B). Dual mono mode allows you to use Output A for mono Mains and Output B for monitors. This clever functionality powers both your mains and monitors without the need for an additional power amp.
What's in the Box Behringer PMP3000 Powered Mixer, Power Cable, User's Manual

Buy NowGet 32% OFF

Click here for more information about Behringer PMP3000 1,200-Watt 16-Channel Powered Mixer

Read More...

Allen & Heath ZED-10FX Four Mono Mic/Lines with 2 Active D.I., 3 Stereo Line Inputs and Onboard Effects Review

Allen and Heath ZED-10FX Four Mono Mic/Lines with 2 Active D.I., 3 Stereo Line Inputs and Onboard Effects
Average Reviews:

(More customer reviews)
Just got the ZED-10FX. So far, I have only tested it and done 1 gig but wanted to get a quick review in for those of you shopping as vigorously as I was. My goal was to find something that had high quality audio but a low channel count and small footprint (I'm a solo musician). It has thus far met my needs.
My first priority was finding quality mic preamps, I've found this to be as important as the microphone that's used. These apparently use the same design as the ones A&H puts in their acclaimed MixWizard series. I can only compare them to the Mackie CFX series preamps that I'm used to and LOVE. The ZED's are just as good or better- really clear, warm, and responsive. I also use a stereo channel to run a loop station with beats, electronic phrases, and live guitars. The overall output of the mixer just sounds great- clean, punchy, musical. The EQ is killer as well, very legit and impactful as you adjust. Knobs instead of faders was initially a turn-off for me but I must say I am really happy with these. They are very well mounted and have a heavy, super smooth movement to them. The gradual and fluid change in the levels as you turn the knobs is far superior to what I'm used to with Mackie. They are also very brightly colored and contrasted for low light identification of everything. I would actually take these knobs over a cheap 60mm fader any day.
I have not done any USB recording so can't say much on that (although it's a little disappointing not to have channel separation as you would get with the cheaper Alesis Multimix). However, the analog recording and signal routing flexibility of the ZED is impressive and sold me. Personally I am running my stage monitor out of the "monitor out" and saving the aux send as well as the assignable "record out" for sub mixing and live recording to a digital 4-track. Also, the circuitry and switching of everything is really clever and illustrated well on the mixer surface with helpful connecting lines.
Construction seems pretty solid short of some barely noticeable stressing on the seams of the red plastic sides (Made in China, par for the course) and the rubber feet are not perfectly level with each other. Neither issue represents any malfunction as far as I can tell but I'll admit its aesthetically annoying.
As far as the FX go, I think they are easy enough to control and the basics are there (reverbs, delays, etc.) However they didn't blow me away sonically at least for recording- just a hair on the cheapy sounding side. I've been fine with them in live application though and they are certainly adequate for this price point.
Overall, this is a great sounding mixer that's the size of a bulky laptop and weighs 8 lbs.! Combine it with some nice active loudspeakers (I use QSC K10s) and you've got a powerful system that fits in your trunk.


Click Here to see more reviews about: Allen & Heath ZED-10FX Four Mono Mic/Lines with 2 Active D.I., 3 Stereo Line Inputs and Onboard Effects

Built by Allen & Heath, ZED-10FX is an amazing little desk for small band mixing, complete with onboard effects. It is ultra portable for carrying to the gig, and can be used for recording live or in the studio. Guitars can be plugged in directly to the mixer using the specially designed high-impedance inputs, while the mixer has two stereo inputs for MP3/CD players or keyboards. Equipped with professional XLR stereo outputs and a flexible monitoring section with headphone and speaker feed outputs. ZED-10FX is bundled with IK Multimedia's AmpliTube X-GEAR software, giving access to superbly modelled amps and effects. Class A FET (Field Effect Transistor) inputs deliver the warmth associated with valve tube preamplifiers and a 26dB gain boost switch provides gain needed for instruments with very low output pickups. In addition to all of this, a USB port enables direct connection to a PC or Mac for direct recording and stereo playback with your DAW software of choice. Allen & Heath is known for building high quality mixers for the last 40+ years. At any time of day or night, across the globe, there is an Allen & Heath mixer out there working hard, sounding great and making life a little easier for the person at the controls. Back in the early 70s Allen & Heath hand-built consoles in a tiny factory in London for elite bands like Pink Floyd and The Who. These days Allen & Heath customers are spread across almost every environment imaginable, including touring, theatres, churches, nightclubs, TV and radio stations, recording studios and countless other places where great sound matters.

Buy NowGet 9% OFF

Click here for more information about Allen & Heath ZED-10FX Four Mono Mic/Lines with 2 Active D.I., 3 Stereo Line Inputs and Onboard Effects

Read More...

Pro Tools Mbox Mini (3rd gen) Review

Pro Tools Mbox  Mini (3rd gen)
Average Reviews:

(More customer reviews)
First let me say, I have no idea what the other guy is talking about. I just got my Mbox Mini the other day and had zero issues installing the program.
As for using the Pro Tools, it can do everything and sets the standard. I wish it came with more plug-ins, but those that are included cover all aspects of sound production. I was surprised to see a trimmed-down Guitar Rig 4 plug-in included.
While the learning curve for Pro Tools is steep, once you get the hang of it, there isn't anything it - and you, can't do!

Click Here to see more reviews about: Pro Tools Mbox  Mini (3rd gen)



Buy Now

Click here for more information about Pro Tools Mbox  Mini (3rd gen)

Read More...

RODE NT1A Cardioid Condenser Microphone Review

RODE NT1A Cardioid Condenser Microphone
Average Reviews:

(More customer reviews)
If you are in to producing/engineering and want a super mean condensor mic without spending alot of cash, this is one to get; very cheap with an extremely expensive sound. It does not have any polar switches or any built in eq's, but most all DAW's do have eq's and phase reverse abilities. Plus, its better to cut freq's that are there, then to try and boost freq's that aren't there; the latter is impossible actually. I'm telling you, don't let the price tag throw you off; this baby makes everything sound good. I've used it on vocals, acoustic guitars, drums as an overhead/ride mic as well as a room mic for ambience. I also have a matched pair of NT 5's that are also absolutely amazing. Rode is a great Australian company that makes amazing mics with a 10 year warranty; yep...10 years. Get one, you won't be dissapointed. Remember though, bad acoustics = bad recording sound.

Click Here to see more reviews about: RODE NT1A Cardioid Condenser Microphone

The original NT1 was voted "Best Microphone at Any Price" by the editors of Electronic Musician magazine. The NT1A delivers performance usually associated with higher priced microphones. Features: large capsule (1") with gold-plated membrane; cardioid polar pattern; ultra low noise, transformerless circuitry; state of the art surface mount electronics; heavy-duty satin-nickel finish; internal shock mounting system; gold plated output connectors; true condenser (externally biased); full frequency response. The NT1A will blow you away! Ultra low-noise, transformerless circuitry.Cardioid polar pattern.Large capsule (1") with gold-plated membrane.Surface mount electronics.Heavy-duty satin-nickel finish.Internal shock mounting system.Gold plated output connectors.True condenser design (externally biased). WARRANTYAll RODE products are warrantied for 1 year from the date of purchase. Your purchase may be registered ?on-line? or by mailing the warranty card. The RODE Warranty covers parts and labour that may be required to repair the microphone during the warranty period.The Warranty excludes defects caused by normal wear, modification, shipping damage or failure to use the microphone as per RODE's Instruction Guide.

Buy Now

Click here for more information about RODE NT1A Cardioid Condenser Microphone

Read More...

Mackie Onyx 32 Mixer (4 Bus, 28 Onyx Preamps and 2 Stereo Channels) Review

Mackie Onyx 32 Mixer (4 Bus, 28 Onyx Preamps and 2 Stereo Channels)
Average Reviews:

(More customer reviews)
Esta mezcladora es un equipo increiblemente genial, logramos superar todas las desventajas que habíamos tenido tiempo atrás. Tiene una consistencia robusta en los componentes, todos los controles demuestran gran calidad. El manual es sencillo e incluso puedo mencionar que aprendí muchas cosas del manual ya que no se limitan a explicar cuestiones técnicas sino más bien se obtienen ejemplos prácticos. El control que me proporciona sobre lo que quiero tener en el monitor/phones es increible. Todo lo que siempre había querído hacer para poder monitorear la mezcla ahora es posible. La calidad de la ecualización es estupenda realmente no es dificil lograr una equalización adecuada en pocos segundos. El compresor/limitador es un recurso importantísimo que va por el mismo precio. El control de las líneas auxiliares es genial.

Click Here to see more reviews about: Mackie Onyx 32 Mixer (4 Bus, 28 Onyx Preamps and 2 Stereo Channels)



Buy NowGet 30% OFF

Click here for more information about Mackie Onyx 32 Mixer (4 Bus, 28 Onyx Preamps and 2 Stereo Channels)

Read More...